Rockwell Automation 1395 Digital DC Drive FRN 5-10.10/9.30 - Manual (Page 135)

Chapter 6
Installation
6-11
configured as a stand alone unit, the TE and PE grounds may be run
individually to the drive, or a jumper can be placed as shown in Table 6.C
and one ground lead run as indicated in Table 6.D.
Table 6.C
Safety/Signal Ground
Wiring Connection
TB2 – 4 & 5
1 – 30HP 230VAC
2 – 60 HP 460VAC
Rating
TB2 – 6 & 7
60 – 100HP 230VAC
75 – 200 HP 460VAC
TB5 – 10 & 11
125 – 300HP 230VAC
250 – 600 HP 460VAC
Table 6.D
Safety Ground Connections
Ground Terminal
TB2 – 5
1 – 30HP 230VAC
2 – 60 HP 460VAC
Rating
TB2 – 7
60 – 100HP 230VAC
75 – 200 HP 460VAC
TB5 – 11
125 – 300HP 230VAC
250 – 600 HP 460VAC