Adapter boards, Adapter boards discrete adapter board – Rockwell Automation 1395 Digital DC Drive FRN 5-10.10/9.30 User Manual
Page 153
Chapter 6
Installation
6-29
Adapter Boards
Discrete Adapter Board
The Discrete Adapter Board is connected to Microbus Port A with wiring
to external devices being accomplished at TB3, terminals 23 to 52.
The drive is shipped pre-configured, meaning that all of the inputs and
outputs are linked to a predefined signal.
Figure 6.17 shows the 1395 standard configuration for the Discrete
Adapter Board. The user has the flexibility to configure the drive for a
particular application. Refer to the Discrete Adapter Manual for detailed
information.
115VAC Connection – The 115VAC power source can be wired to be
referenced or not referenced to common (zero volts) as shown in Fig. 6.16.
Figure 6.16
Typical 115VAC Digital Input Connections
DIGITAL IN 2
4
6
47
48
49
50
51
TB3
115V AC
115V AC COMMON
DIGITAL COMMON
DIGITAL IN 1
DIGITAL IN 3
DIGITAL IN 4
Clear Faults*
Start*
Jog 2*
Stop*
DIGITAL IN 2
47
48
49
50
51
TB3
DIGITAL COMMON
DIGITAL IN 1
DIGITAL IN 3
DIGITAL IN 4
Clear Faults*
Start*
Jog 2*
Stop*
115V AC Common
Internally Referenced to Common
Not Referenced to Common
* External to the Drive
115VAC