Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 183)

Index I-5
RSNetWorx for EtherNet/IP
definition, G-7
web site, G-7
S
safety precautions, 1-4
scanner
adding to an I/O configuration, 4-2
definition, G-7
SCANport
connector on module, 1-1
data rates, A-1
definition, G-7
peripheral, G-7
products, 1-3, G-8
SCANport Adapter parameter, B-1
SCANport Device object, C-18
SCANport Fault object, C-23
SCANport Parameter object, C-20
SCANport Warning object, C-25
Serial Port Rate parameter, B-6
SP I/O Act parameter, B-5
SP I/O Cfg parameter, B-5
specifications
EtherNet/IP address, G-3
EtherNet/IP subnet mask, G-8
module, A-1
status indicators
definition, G-8
locating, 7-1
normal operation, 1-6
troubleshooting with, 7-1
Subnet Act 1 - 4 parameters, B-3
Subnet Cfg 1 - 4 parameters, B-2
subnet mask
definition, G-8
setting with BOOTP, 3-3
setting with parameters, 3-5
switches
definition, G-8
example network, 2-5
T
TCP (Transmission Control Protocol),
G-8
TCP/IP Interface object, C-27
technical support, P-2
tools required, 1-3
troubleshooting, 7-1 to 7-7
U
UDP (User Datagram Protocol), G-8
update, see flash update
W
Web Enable parameter, B-9
Web Features parameter, B-10
web pages
enabling with parameter, 3-15
for the module, 8-1
web site
for DriveExplorer software, G-2
for DriveTools SP software, G-2
for EDS files, G-3
for EtherNet/IP, G-3
for manuals, P-1
wiring, see cables
Z
zero data
configuring a module for, 3-13
definition, G-9