Rockwell Automation 1203-EN1 EtherNet/IP-to-SCANport Module - Manual (Page 90)

8-2 Viewing the Module’s Web Pages
To view the web pages of the module
1. On a computer with access to the EtherNet/IP network on which the
module is installed, launch a web browser such as Microsoft

Internet Explorer (version 5.0 or higher) or Netscape
®
Navigator
®
(version 4.6 or higher).
The computer can access the module web pages if it is connected to
the same network as the module, or if it is connected to a network
with access to the module’s network via a gateway device (for
example, a router).
2. In the Address (Explorer) or Location (Navigator) box, type the IP
address of the module and then press ENTER. The web Home Page
for the module appears.
Important: Clicking the browser’s Refresh button always re-displays
the Home Page even while viewing another module web
page.
Figure 8.1 Module Web Home Page Example