Setting up the 1769-adn, Setting up the 1769-adn -4, Figure 8.3 – Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module User Manual
Page 134
Advertising
8-4
ControlLogix w/1769-ADN DeviceNet Example Ladder Program
Figure 8.3 Example DeviceNet Network
To configure the 1769-ADN for use with the example program using
RSNetWorx for DeviceNet v3.21 (or higher), perform these steps:
1. Double-click on the 1769-ADN adapter image in the graphic display
window (
). In the ladder example system, the node address
setting on the adapter is “2.”
Figure 8.4 1769-ADN Adapter Image Screen
2. Select the Module Configuration tab and build the remote ADN
system by dragging and dropping components (
). In the
ladder example, the remote drop consists of an ADN, PA4 power
supply, 1769-SM2 module, and ECR end cap terminator.
Setting Up the 1769-ADN
Advertising