Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module User Manual
Page 48
Advertising
3-10
Configuring the Module
Figure 3.8 Select Module Type Screen
3. After the Module Properties screen (
) appears, enter a
name for the module, such as “My_1769_SM2.” Change the Comm
Format to “Data - INT,” which will enable the entry of Output
Connection parameters (no longer grayed out). Enter the Slot
location of the 1769-SM2. Enter the desired Input and Output word
length (see
or
Table 3.B
) and Configuration data size
). Click Next >.
Figure 3.9 Module Properties Screen
4. On the Module Properties last screen (
), click Finish >>.
Advertising