Rockwell Automation 1769-SM2 Compact I/O DSI/Modbus Communication Module User Manual

Page 169

Advertising
background image

Module Parameters

B-7

38

[DSI I/O Act 3]

Displays the CH3 drives that are active in
Multi-Drive mode.

Default:

xxx0 0000

Bit Values:

0 = Drive Active
1 = Drive Inactive

Type:

Read Only

39
40
41
42
43

[Drv 0 Addr 3]
[Drv 1 Addr 3]
[Drv 2 Addr 3]
[Drv 3 Addr 3]
[Drv 4 Addr 3]

Sets the corresponding node addresses of the
daisy-chained CH3 drives when the module is in
Multi-Drive mode.

Important: The setting for each of these
parameters must match the drive Parameter 104 -
[Comm Node Addr] value for each respective
drive. Each drive node address must be unique
(no duplicate node addresses).

Default:

100

Default:

100

Default:

100

Default:

100

Default:

100

Minimum:

0

Maximum:

247

Type:

Read/Write

Reset Required:

Yes

44

[RTU Baud Rate 3]

Sets the baud rate used by the CH3 drives when
the module is in Multi-Drive mode and Parameter
37 - [DSI I/O Cfg 3]
is set to “5” (RTU Master).

Default:

0 = 38.4K bps

Values:

0 = 38.4K bps
1 = 19200 bps
2 = 9600 bps
3 = 4800 bps
4 = 2400 bps
5 = 1200 bps
6 = 600 bps
7 = 300 bps

Type:

Read/Write

Reset Required:

Yes

45

[RTU Format 3]

Selects the RTU format used by the CH3 drives
when the module is in Multi-Drive mode and
Parameter 37 - [DSI I/O Cfg 3] is set to “5” (RTU
Master). The RTU format consists of three
components: data bits (8 data bits only), parity
(None, Even or Odd), and stop bits (1 or 2).

Default:

0 = 8-N-1

Value:

0 = 8-N-1
1 = 8-E-1
2 = 8-O-1
3 = 8-N-2
4 = 8-E-2
5 = 8-O-2

Type:

Read/Write

Reset Required:

Yes

46

[RTU Rx Delay 3]

Sets the CH3 inter-character delay used to detect
the end of a receive packet when the module is in
Multi-Drive mode and Parameter 37 - [DSI I/O
Cfg 3]
is set to “5” (RTU Master). If this value is
set to 0 (zero), the ModBus default delay of 1.5
character times is used.

Default:

0 milliseconds

Minimum:

0 milliseconds

Maximum:

500 milliseconds

Type:

Read/Write

Reset Required:

Yes

Parameter
No. Name and Description

Details

Bit
Definition

Not Us

ed

Not Us

ed

Not Us

ed

Dr

iv

e 4

Dr

iv

e 3

Dr

iv

e 2

Dr

iv

e 1

Dr

iv

e 0

Default

x

x

x

0

0

0

0

1

Bit

7

6

5

4

3

2

1

0

Advertising