Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 165)

Publication AG-UM008C-EN-P - February 2005
Configuring SLC 5/03, 5/04, and 5/05 Processors 4-27
Configuring a Radio Modem
Station To configure an SLC 5/03, SLC 5/04 or SLC 5/05 processor channel 0
for DF1 Radio Modem, follow the steps below using your
programming software:
1. To bring up the Channel
Configuration interface,
double-click on the Channel
Configuration icon.
2. Define the location of the
diagnostic file used for
Channel Status here. See
Table 4.8 on page 4-30 for
diagnostic file details.