D-25 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 381
Advertising
Publication AG-UM008C-EN-P - February 2005
Worksheets D-25
Worksheet 7.4
Logix DF1 Full-Duplex
Point-to-Point
Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 7-24.
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Baud Rate
1200
Parity
NONE
Data Bits
8
Stop Bits
1
Control Line
FULL DUPLEX MODEM
RTS Send Delay (x 20 msec) 0
RTS Off Delay (x 20 msec)
0
Station Address
9
NAK Receive Limit
3
ENQ Transmit Limit
3
ACK Timeout (x 20 msec)
500
Embedded Responses
ENABLED
Error Detection
CRC
Duplicate Detection
ENABLED
Advertising