D-10 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 366
Advertising
Publication AG-UM008C-EN-P - February 2005
D-10 Worksheets
Worksheet 3.2
MicroLogix 1100/1200/1500
DF1 Half-Duplex Master
Station Configuration Using
Message-based
Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 3.4 on page 3-21.
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Chan. 0 (1100/1200/1500
LSP)
Chan. 1 (1500 LRP)
Baud Rate
9600
Parity
NONE
Node Address
99
Control Line
HALF-DUPLEX WITHOUT MODEM
Error Detection
CRC
Polling Mode
MESSAGE BASED (ALLOW SLAVE TO
INITIATE MESSAGE)
Duplicate Packet Detect
Enabled
Reply Message Wait
Timeout
1
ACK Timeout
50
RTS Off Delay (x 20 ms)
0
RTS Send Delay (x 20 ms)
0
Message Retries
3
Pre-Transmit Delay (x 1 ms)
0
Advertising