How to use the worksheets – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 359
Advertising
Publication AG-UM008C-EN-P - February 2005
Worksheets D-3
How to Use the Worksheets
Each SCADA worksheet has different fields that you define, but the
basic layout is the same. Make as many copies of the worksheets as
you need. Do not write on the originals.
Each worksheet refers to the
parameter tab location.
Each worksheet has an example.
Tab
Parameter
Example
Your Configuration
Serial Port
Diagnostic File
9
Remote Mode Change
DISABLED
Baud Rate
9600
Stop Bits
1
Control Line
HALF DUPLEX WITHOUT
CONTINUOUS CARRIER
Parity
NONE
Options
Station Address
1
Reply MSG Wait
5
ACK Timeout
15
DF1 Retries
3
MSG Application Timeout
1
Error Detect
CRC
Advertising