Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 373)

Publication AG-UM008C-EN-P - February 2005
Worksheets D-17
Worksheet 4.4
SLC 5/03, 5/04, and 5/05 DF1
Full-Duplex
Point-to-Point
Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 4.9 on page 4-34.
Page 1 of 1
Tab Parameter Example Your Configuration
Chan. 0 System Mode Change DISABLED
Diagnostic File N19
Baud Rate 1200
Parity NONE
Stop Bits 1
Source ID 0
Control Line FULL-DUPLEX MODEM
Error Detection CRC
Embedded Responses ENABLED
Detect Duplicate Packet ENABLED
ACK Timeout (x 20 ms) 500
NAK Retries 3
ENQ Retries 3