Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 368)

Publication AG-UM008C-EN-P - February 2005
D-12 Worksheets
Worksheet 3.4
MicroLogix 1100/1200/1500
DF1 Full-Duplex
Point-to-Point
Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 3.9 on page 3-34.
Page 1 of 1
Tab Parameter Example Your Configuration
Chan. 0 (1100/1200/1500)
Chan. 1 (1500 LRP)
Baud Rate 1200
Parity NONE
Source ID 0
Control Line FULL-DUPLEX MODEM
Error Detection CRC
Embedded Responses ENABLED
Detect Duplicate Packet ENABLED
ACK Timeout (x 20 ms) 500
NAK Retries 3
ENQ Retries 3