D-23 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 379
Advertising
Publication AG-UM008C-EN-P - February 2005
Worksheets D-23
Worksheet 7.2
Logix DF1 Half-Duplex
Master Station
Configuration Using
Message-based
Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 7-18.
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Baud Rate
9600
Parity
NONE
Data Bits
8
Stop Bits
1
Control Line
HALF-DUPLEX WITHOUT
CONTINUOUS CARRIER
RTS Send Delay (x 20 ms)
0
RTS Off Delay (x 20 ms)
0
Station Address
99
Transmit Retries
3
ACK Timeout (x 20 ms)
50
Reply Message Wait Time
1
Polling Mode
MESSAGE BASED (ALLOW SLAVE TO
INITIATE MESSAGES)
Error Detection
CRC
Duplicate Detection
ENABLED
Advertising