Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 357)

1 Publication AG-UM008C-EN-P - February 2005
Appendix
D
Worksheets
Appendix Objective Use this appendix to document your serial channel configurations.
Each worksheet corresponds to a processor’s master or remote station
configuration.
Make photocopies of the worksheets. Do not write on the originals.
For defining this configuration Use Found on
page And configuration
screen on page With definitions
on page
SCADA system schematic Worksheet 1.1 D-4 not applicable not applicable
Enhanced PLC-5 DF1 Half-Duplex Master Station
Configuration Using Standard Communication Worksheet 2.1 D-5
Enhanced PLC-5 DF1 Half-Duplex Master Station
Configuration Using Message-based Communication Worksheet 2.2 D-6
Enhanced PLC-5 DF1 Half-Duplex Slave Station
Configuration Worksheet 2.3 D-7
Enhanced PLC-5 DF1 Full-Duplex Point-to-Point
Configuration Worksheet 2.4 D-8
MicroLogix 1100/1200/1500 DF1 Half-Duplex Master
Station Configuration Using Standard Communication Worksheet 3.1 D-9
MicroLogix 1100/1200/1500 DF1 Half-Duplex Master
Station Configuration Using Message-based
Communication Worksheet 3.2 D-10
MicroLogix 1100/1200/1500 DF1 Half-Duplex Slave
Station Configuration Worksheet 3.3 D-11
MicroLogix 1100/1200/1500 DF1 Full-Duplex
Point-to-Point Configuration Worksheet 3.4 D-12
MicroLogix 1100/1200/1500 Radio Modem Slave Station
Configuration Worksheet 3.5 D-13
SLC 5/03, 5/04 DF1 Half-Duplex Master Station
Configuration Using Standard Communication Worksheet 4.1 D-14
SLC 5/03, 5/04, and 5/05 DF1 Half-Duplex Master Station
Configuration Using Message-based Communication Worksheet 4.2 D-15
SLC 5/03, 5/04, and 5/05 DF1 Half-Duplex Slave Station
Configuration Worksheet 4.3 D-16
SLC 5/03, 5/04, and 5/05 DF1 Full-Duplex Point-to-Point
Configuration Worksheet 4.4 D-17
SLC 5/03, 5/04, and 5/05 DF1 Radio Modem Station
Configuration Worksheet 4.5 D-18
SLC 500 Processor with 1747-KE Module DF1 Half-Duplex
Slave Station Configuration Worksheet 5.1 D-19