D-21 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 377
Advertising
Publication AG-UM008C-EN-P - February 2005
Worksheets D-21
Worksheet 6.1
MicroLogix 1000 DF1
Half-Duplex Slave Station
Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 6-11
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Baud Rate
9600
Node Address
99
Control Line
HALF-DUPLEX MODEM
Error Detection
CRC
EOT Suppression
DISABLED
Duplicate Packet Detect
ENABLED
Poll Timeout (x 20 ms)
3000
RTS Off Delay (x 5 ms)
0
RTS Send Delay (x 5 ms)
0
Message Retries
3
Pre-Transit Delay (x 5 ms)
0
Advertising