Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 375)

Publication AG-UM008C-EN-P - February 2005
Worksheets D-19
Worksheet 5.1
SLC 500 Processor with
1747-KE Module DF1
Half-Duplex Slave Station
Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 5-7.
Page 1 of 1
Tab Parameter Example Your Configuration
Duplicate Packet Detection ENABLED
Checksum CRC
Constant Carrier Detect DISABLED
Modem Init String
Message Timeout 10000
Hardware Handshaking ENABLED
Poll Timeout (x 5 ms) 2000
Message Retries 2
RTS On Delay (x 5 ms) 0
RTS Off Delay (x 5 ms) 0
Local/Remote Mode REMOTE
Slave Address/Group
Number 0
Master Station Address 0