Overview, Overview -2, 5000 programming software – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 228: Figure 7.1 configuring a logix controller
Advertising
Publication AG-UM008C-EN-P - February 2005
7-2 Configuring Logix Controllers
Overview
To configure a Logix controller:
1. Install the controller.
2. Install and configure the modem.
3. Define the controller’s communication characteristics using
RSLogix
™
5000 programming software.
Figure 7.1 Configuring a Logix Controller
RS-232
I/O
RUN
OK
RUN
REM
PROG
BAT
Modem
RSLogix 5000
programming
software
Advertising