Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 95)

Publication AG-UM008C-EN-P - February 2005
Configuring MicroLogix 1100/1200/1500 Controllers 3-27
Configuring a Radio Modem
Station To configure a MicroLogix 1100/1200/1500 controller channel 1 for
DF1 Radio Modem, do the following using your programming
software:
1. To bring up the Channel
Configuration interface,
double-click on the Channel
Configuration icon.
2. On the Channel tab, choose
DF1 Radio Modem for your
Driver.
3. Configure the communication
driver characteristics
according to Table 3.7.