Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 380)

Publication AG-UM008C-EN-P - February 2005
D-24 Worksheets
Worksheet 7.3
Logix DF1 Half-Duplex
Slave Station Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 7-23.
Page 1 of 1
Tab Parameter Example Your Configuration
Baud Rate 9600
Parity NONE
Data Bits 8
Stop Bits 1
Control Line HALF-DUPLEX WITHOUT
CONTINUOUS CARRIER
RTS Send Delay (x 20 ms) 0
RTS Off Delay (x 20 ms) 0
Station Address 99
Transmit Retries 3
Slave Poll Timeout (x 20 ms) 1500
EOT Suppression DISABLED
Error Detection CRC
Duplicate Detection ENABLED