Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 367)

Publication AG-UM008C-EN-P - February 2005
Worksheets D-11
Worksheet 3.3
MicroLogix 1100/1200/1500
DF1 Half-Duplex Slave
Station Configuration
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 3.5 on page 3-23.
Page 1 of 1
Tab Parameter Example Your Configuration
Chan. 0 (1100/1200/1500)
Chan. 1 (1500 LRP)
Baud Rate 9600
Stop Bits 1
Parity NONE
Node Address 99
Control Line HALF-DUPLEX MODEM
Error Detect CRC
EOT Suppression DISABLED
Duplicate Detect ENABLED
Poll Timeout 500
RTS Off Delay 0
RTS Send Delay 0
Message Retries 3
Pre-Transmit Delay 0