Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 371)

Publication AG-UM008C-EN-P - February 2005
Worksheets D-15
Worksheet 4.2
SLC 5/03, 5/04, and 5/05 DF1
Half-Duplex Master Station
Configuration Using
Message-based
Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 4.4 on page 4-20.
Page 1 of 1
Tab Parameter Example Your Configuration
Chan. 0 System Mode Change DISABLED
Diagnostic File N19
Baud Rate 9600
Parity NONE
Stop Bits 1
Node Address 99
Control Line HALF-DUPLEX WITHOUT
CONTINUOUS CARRIER
Error Detection CRC
Polling Mode MESSAGE BASED (ALLOW SLAVE TO
INITIATE MESSAGE)
Duplicate Packet Detect Enabled
Reply Message Wait
Timeout 1
ACK Timeout 50
RTS Off Delay (x 20 ms) 0
RTS Send Delay (x 20 ms) 0
Message Retries 3
Pre-Transmit Delay (x 1 ms) 0