D-22) f, D-22 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 378
Publication AG-UM008C-EN-P - February 2005
D-22 Worksheets
Worksheet 7.1
Logix DF1 Half-Duplex
Master Station
Configuration Using
Standard Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 7-9.
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Baud Rate
9600
Parity
NONE
Data Bits
8
Stop Bits
1
Control Line
HALF-DUPLEX WITHOUT
CONTINUOUS CARRIER
RTS Send Delay (x 20 ms)
0
RTS Off Delay (x 20 ms)
0
Station Address
99
Transmit Retries
3
ACK Timeout (x 20 ms)
50
Polling Mode
STANDARD (MULTIPLE MESSAGE
TRANSFER PER NODE SCAN)
Normal Poll Group Size
0
Normal Poll Node Tag
Normal_Poll_Array
Priority Poll Node Tag
Priority_Poll_Array
Active Station Tag
Active_Station_Array
Master Transmit
BETWEEN STATION POLLS
Error Detection
CRC
Duplicate Detection
ENABLED