Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 181)

Publication AG-UM008C-EN-P - February 2005
Configuring SLC 5/03, 5/04, and 5/05 Processors 4-43
Example MSG Control
Blocks
Figure 4.6 Write MSG from an SLC 5/03, 5/04, or 5/05 Processor to a PLC-5 Processor
or Logix Controller
TIP
Leave the channel 0 Message Retries at default (3)
unless you have an extremely error free or extremely
error prone network.
Application See page:
SLC 5/03, 5/04, or 5/05 write message to a PLC-5 or Logix
processor 4-43
SLC 5/03, 5/04, or 5/05 read message to a PLC-5 or Logix
processor 4-44
SLC 5/03, 5/04, or 5/05 write message to another SLC 500
or MicroLogix processor 4-45
SLC 5/03, 5/04, or 5/05 read message to another SLC 500
or MicroLogix processor 4-46
MSG being sent to a PLC-5
processor or a Logix
controller