D-14 – Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM User Manual
Page 370
Publication AG-UM008C-EN-P - February 2005
D-14 Worksheets
Worksheet 4.1
SLC 5/03, 5/04, and 5/05 DF1
Half-Duplex Master Station
Configuration Using
Standard Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see Table 4.1 on page 4-11.
Page 1 of 1
Tab
Parameter
Example
Your Configuration
Chan. 0 System
Mode Change
DISABLED
Diagnostic File
N19
Baud Rate
9600
Parity
NONE
Stop Bits
1
Node Address
99
Control Line
HALF-DUPLEX WITHOUT
CONTINUOUS CARRIER
Error Detection
CRC
Polling Mode
STANDARD (MULTIPLE MESSAGE
TRANSFER PER NODE SCAN)
Duplicate Packet Detect
Enabled
ACK Timeout
50
RTS Off Delay (x 20 ms)
0
RTS Send Delay (x 20 ms)
0
Message Retries
3
Pre-Transmit Delay (x 1 ms)
0
Priority Polling Range - High 0
Priority Polling Range - Low 255
Normal Polling Range - High 3
Normal Polling Range - Low 1
Normal Poll Group Size
0