Rockwell Automation DAG6.5.8 APPLICATION GUIDE SCADA SYSTEM - Manual (Page 361)

Publication AG-UM008C-EN-P - February 2005
Worksheets D-5
Worksheet 2.1
Enhanced PLC-5 DF1
Half-Duplex Master Station
Configuration Using
Standard Communication
Use this worksheet to record your station’s configuration. For
descriptions of each line item, see page 2-5.
Page 1 of 1
Tab Parameter Example Your Configuration
Serial Port Remote Mode Change DISABLED
Diagnostic File N19
Baud Rate 9600
Bits Per Character 8
Stop Bits 1
Control Line HALF DUPLEX WITHOUT
CONTINUOUS CARRIER
Parity NONE
Error Detect CRC
Options Station Address 1
DF1 Retries 3
RTS Send Delay (x 20 ms) 0
RTS Off Delay (x 20 ms) 0
ACK Timeout (x 20 ms) 15
MSG Application Timeout
(x 20 ms)
1
Polling Polling Mode STANDARD (MULTIPLE MESSAGE
TRANSFER PER NODE SCAN)
Master Message Transmit BETWEEN STATION POLLS
Normal Poll Node File N10
Normal Poll Group Size 3
Priority Poll Node File N11
Active Station File B9