Additional information for existing programs – Baseline Systems BaseStation 1000 User Manual
Page 117
BaseStation 1000 Irrigation Controller Manual
Zone# Program
Run
Time
Hydrozone
Zone Description
20.
21.
22.
23.
24.
25.
26.
Additional Information for Existing Programs
Program
Watering Days
Start Times
Programming Information for the BaseStation 1000 Controller
Use the table below to plan connections and programming before physically programming the
controller.
Note: When you are connecting biSensors, wire them across the valve wires that are on terminals
A-1, A-2, B-1 or B-2 because only these terminals support biSensors that are wired across valve
connections. You can only connect one biSensor per terminal. If you have more than four
biSensors, you will need to run two-wire for the additional biSensor connections.
Connector
biCoder
S/N
biSensor
S/N
Zone # on
BaseStation
Old
Zone
#
Hydrozone
Program
Run
Time
A-1
VA00001
A-2
VA00002
A-3
VA00003
A-4
VA00004
Page 111