Setting a seasonal adjustment for a program – Baseline Systems BaseStation 1000 User Manual
Page 52
BaseStation 1000 Irrigation Controller Manual
Note: To move backwards in the list of programs, press and hold the PRG button, and then
press the – button repeatedly.
3. Press the button to highlight the Setup Prg. Start option, and then press the OK button.
The Setup Prg. Start screen displays the list of start conditions.
4. Press the button to highlight the start condition that you want to remove, and then press
the OK button. The checkmark that displayed next to the option is removed, which indicates
that the start condition is no longer applied to the program.
5. Press the RUN button to exit Program Setup.
Setting a Seasonal Adjustment for a Program
If your area is experiencing unusually wet or dry weather and you want to adjust your entire
system either up or down, you can adjust the watering by a percentage of normal.
1. Press the Program Setup button. The Program Setup menu displays.
2. If the program that you want to modify displays in the upper-left corner of the screen,
continue to step 3. Otherwise, press the PRG button until the program that you want to
modify displays in the upper-left corner of the screen.
Note: To move backwards in the list of programs, press and hold the PRG button, and then
press the – button repeatedly.
3. Press the or button to highlight the
Seasonal Adjust option, and then press the
OK button. The Seasonal Adjust screen
displays.
4. Press the + or – button to change the
percentage in the Seasonal Adjust field. Keep
in mind that 100% causes the system to
water as scheduled. If you enter 50%, the
system decreases watering by half. If you enter 200%, the system doubles watering.
Note: When you set a Seasonal Adjust factor, it remains active until you change the number
in this field to 100 to indicate that the system should water as scheduled. If you experience an
unexpected watering schedule, check this field to determine whether you still have a seasonal
adjustment factor set.
5. Press the RUN button to exit Program Setup.
Page 46