Baseline Systems BaseStation 1000 - Manual (Page 98)

BaseStation 1000 Irrigation Controller Manual
Viewing the Running Zones Report
1. Press the RUN button.
2. Press the BACK button. The Status Report
menu displays.
3. Press the  or  button to highlight Running
Zones, and then press the OK button. The
Running Zones screen displays.
Any running zones are listed along with a
countdown timer of the remaining runtime.
When programs are finished, the report
displays “No Running Zones.”
4. To return to the Status Report menu, press the BACK button.
Viewing Operator Messages
1. Press the RUN button.
2. Press the BACK button. The Status Report menu displays.
3. Press the  or  button to highlight View Messages, and then press the OK button. The View
Messages screen displays.
Note: Messages notify you when something
in your system needs your attention, such as
an open solenoid or no response from a
device. When your system is operating as
expected, the View Messages screen
indicates that there are no messages.
4. Perform any of the following options:
 If the controller indicates that there are multiple messages, press the  button to
display each message.
 If you no longer need the message, press the OK button to clear it.
5. To return to the Status Report menu, press the BACK button.
Page 92