Baseline Systems BaseStation 1000 - Manual (Page 47)

BaseStation 1000 Irrigation Controller Manual
6. Press the  button to highlight the Set Start
Days option, and then press the OK button.
The Set Start Days screen displays.
7. Press the  button to highlight one of the
following options, and then press the OK
button:
 Weekday – After you select the
Weekday option, press the  button to set up the weekdays when you want the
program to start. By default, the boxes for the days of the week are marked with a
checkmark, which indicates that the program will start every day. If you want to change
a start day setting, press the  button to select the day, and then press the OK button
to change the setting.
 Even – Select Even to start the program only on the even numbered days of the month.
 Odd Skip 31 st – Select Odd Skip 31 st to start the program only on the odd numbered
days of the month, but skip the 31 st day in order to maintain an every-two-day schedule
when crossing to a new month.
 Odd – Select Odd to start the program only on the Odd numbered days of the month.
 Interval – After you select the Interval option, press the  button to set up a custom
day interval. Press the + or – button to change the number in the Day Interval field.
 Smart Interval – After you select the Smart Interval option, press the  button to set up
the intervals for each half month. The calendar displays boxes that represent the
months of the year. The numbers in the boxes represent the day intervals for first half
and second half of the month. Press the  button to move to the box where you want
to change the interval, and then press the + or – button to change the number in the
box.
Note: The Smart Interval based watering schedule works best in regions where
landscapes are irrigated all year. Baseline recommends that you use the historical ET
deficit data for your region to configure the intervals. To find the historical ET deficit
data for your region, consult with your local Agricultural Cooperative Extension office –
you can find a national register of the extension offices at:
http://www.csrees.usda.gov/Extension/
8. Press the BACK button to return to the Day & Time Start menu.
9. Press the  button to highlight the Set Start Times option, and then press the OK button. The
Set Start Times screen displays.
Note: Each active program must have at least one start time. Programs that have no start
times will not run.
10. Press the  button to highlight the box for the start time that you want to change.
11. Press the + or – button to change the number in the box.
Note: To rapidly increase or decrease the number, press and hold the + button or the –
button.
12. Press the RUN button to exit Program Setup.
Page 41