Baseline Systems BaseStation 1000 - Manual (Page 95)

BaseStation 1000 Irrigation Controller Manual
9 – Status Reports & Messages
The main screen shows information about the operating state of the BaseStation 1000 controller.
The controller provides the following categories of reports and each category can have multiple
reports.
• Zone Status
• Program Status
• Flow and Master Valve/Pump Status
• Running Zones
• Operator Messages
• Rain Delay
• Event Days
• System Status
Viewing the Zone Status Report
1. When the controller is in the Run menu, the Zone Status report typically displays on the
screen. If you do not see “ZONE STATUS” and
the list of zones, press the RUN button to
make sure that the controller is in the Run
menu, and then press the BACK button to
display the Status Report menu.
2. The Zone Status option should be
highlighted. If it is not, press the  or 
button to highlight it, and then press the OK
button. The Zone Status screen displays.
3. To return to the Status Report menu, press the BACK button.
Understanding Zone Statuses
The following icons identify the status of the zones:
Icon Status Description
Unassigned The zone does not have a biCoder assigned to it
Idle (Done) The complete cycle has finished for this zone – including watering
and soaking
Page 89