Enabling diagnostics for baseline support – Baseline Systems BaseStation 1000 User Manual
Page 94
BaseStation 1000 Irrigation Controller Manual
Enabling Diagnostics for Baseline Support
If you are working with Baseline Support to troubleshoot a problem on your controller, the support
specialist may ask you to enable additional diagnostic logs that will help track down the problem.
1. Press the System Setup button. The System Setup menu displays.
2. Press the button to highlight the System Settings option, and then press the OK button to
select it. The System Settings screen displays.
3. Perform any of the following actions as directed by Baseline Support:
Copy the full event log to a USB drive: Plug a USB drive into the USB port on the
controller. Press the button to move to the Log to USB field, and then press the + or –
button to put a checkmark in the field. The support specialist will indicate how long you
need to leave the USB drive plugged in
Capture the status of all connected devices: Press the button to move to the Log
Device Status field, and then press the + or – button to put a checkmark in the field.
Capture all BaseManager communication: Press the button to move to the Log
BaseManager IO field, and then press the + or – button to put a checkmark in the field.
Capture all two-wire communication: Press the button to move to the Log Two-Wire
IO field, and then press the + or – button to put a checkmark in the field.
Page 88