Setting up the screen display – Baseline Systems BaseStation 1000 User Manual
Page 87
BaseStation 1000 Irrigation Controller Manual
4. Perform one of the following:
If you are logging into BaseManager for the first time, you need to sign up for a new
account. Click the button on the BaseManager Login page, and then fill in all the fields in
the wizard.
If you already have a BaseManager account, type your username and password in the
fields, and then click Login.
5. On the BaseManager page, click the LiveView tab.
6. Use the mouse to click a button on the LiveView interface. All commands issued through
LiveView are performed on the controller.
7. When you have finished using Internet-based LiveView, close the browser window to prevent
unauthorized users from operating the controller.
Setting Up the Screen Display
You can adjust the brightness and contrast on the BaseStation 1000 display screen to provide
better visibility in a variety of lighting conditions and to accommodate a variety of viewing angles.
You can also set a time limit for the backlight to be turned off.
1. Press the System Setup button. The System Setup menu displays.
2. Press the button to highlight the Display Setup option, and then press the OK button to
select it. The Display Setup screen displays.
3. Press the + or – button to change the number in the Screen Contrast field. A lower number
indicates less contrast and a higher number indicates more contrast. To rapidly increase or
decrease the value, press and hold the + button or the – button.
Note: You will not see the contrast change when you adjust the screen contrast in LiveView.
4. When the screen contrast appears to be suitable for the conditions, stop changing the
number.
5. Press the button to move to the Brightness field, and then press the + or – button to
change the number.
Note: You cannot increase the value in the Brightness field greater than 100%.
6. Press the button to move to the Timeout field, and then press the + or – button to change
the number. This setting enables you to control how long the display remains illuminated
before it goes dark.
7. Perform one of the following options:
To return to the System Maintenance screen, press the BACK button.
To return the controller to the Run menu, press the RUN button.
Page 81