Setting an unexpected flow limit – Baseline Systems BaseStation 1000 User Manual

Page 67

Advertising

BaseStation 1000 Irrigation Controller Manual

6. In the Flow Limit field, the gallons per minute (gpm) value is highlighted. Press the + or –

button to change the number in the field.



To change the value of the digits to the right of the decimal, press the  button to

highlight those digits, and then press the + or – button to change the number.

Note: Press and hold the + button or the – button to rapidly increase or decrease the number

in the field.

7. Press the  button to highlight the Shut Down field, and then press the + or – button to

display a checkmark in the field. The checkmark indicates that the system will shut down the

water source if the gallons per minute in the Flow Limit field is exceeded.

Setting an Unexpected Flow Limit

You can enter a flow limit for a water source that is turned off and then set up the system to shut

down the water source if that limit is exceeded. When you enable this feature, the system will

monitor the flow even when the water source is off in order to prevent water loss due to a broken

pipe.

When you have a NOMV, you can set this limit to allow some flow that is off schedule, such as from

manual taps or hose bibs.

1. Press the Flow Setup button. The Flow Setup menu displays.

2. The Water Source Setup option should be highlighted. If it is not highlighted, press the  or



button to highlight it, and then press the OK button. The Water Source Setup screen

displays.

3. Press the  button to highlight the water source that you want to set the flow limit for, and

then press the OK button. The Flow Setup menu for that water source displays.

4. Press the  or  button to highlight the Flow Management option, and then press the OK

button. The Flow Management menu displays.

5. Press the  button to highlight the Unexpected Flow Limit option, and then press the OK

button. The Unexpected Flow Limit screen displays.