Dell Emulex Family of Adapters - Manual (Page 1062)

Emulex Drivers Version 10.2 for VMware ESXi User Manual P010087-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
1062
Initialization Events (0400 - 0599)
elx_mes0400: Phys Attribute Count Exceeded, Max <value>, Actual
<value>
DESCRIPTION: Too many driver configuration parameters have been set. The limit is
given as Max.
DATA: (1) Maximum number (2) Actual number
ACTION: Reduce the number of actual parameters.
elx_mes0402: Cannot find virtual addr for buffer tag on ring <ringno>
DESCRIPTION: A DMA buffer is not available for this unsolicited command.
DATA: (1) tag, (2) next, (3) prev, (4) postbufq_cnt
ACTION: None required.
elx_mes0403: lpfc_nodev_tmo attribute cannot be set to <val>, allowed
range is [<LPFC_MIN_DEVLOSS_TMO>, <LPFC_MAX_DEVLOSS_TMO>]
DESCRIPTION: Attempt to set the nodev timeout value is outside the range of the
devloss timeout range.
DATA: None
ACTION: Set the nodev timeout between the minimum and maximum devloss timeout
range.
elx_mes0404: Config Param <value> set to <value>
DESCRIPTION: Driver is setting a persistent VPort parameter to a different value.
DATA: (1) New value
ACTION: None. This message is notification only.
elx_mes0405: Config Param <value> set to <value>
DESCRIPTION: Driver is setting a persistent VPort parameter to a different value.
DATA: (1) New value
ACTION: None. This message is notification only.
elx_mes0406: Adapter maximum temperature exceeded (<temperature>),
taking this port offline
DESCRIPTION: The driver has received an error for the adapter indicating that the
maximum allowable temperature has been exceeded.
DATA: (1) work_hs, (2) work_status[0], (3) work_status[1]
ACTION: Ensure that the server fans are not blocked. Shut down the server if the
airflow is restricted.