Dell Emulex Family of Adapters - Manual (Page 564)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
2. Installation
Driver Installation Options
564

ElxPlus driver (supports the OneCommand Manager application, persistent
binding, and LUN mapping and masking)

OneCommand Manager application for Emulex adapters
Note: The Enterprise kit for the OneCommand Manager application does not
operate locally on Windows Server Core. You must install the
OneCommand Manager Core Kit (command-line interface only) to the
Windows Server Core.
Loading the OneInstall Package
To install the drivers using the OneInstall package:
1. Download the OneInstall package from the Emulex website.
2. Navigate to the OneInstall package in Windows Explorer.
3. Double-click the OneInstall package. The Welcome screen appears.
4. Click Next. The Installation options screen appears.
5. Select the drivers and application that you want to install and click Next.
A progress screen appears while the OneInstall installer loads the selected drivers
and applications. When the drivers and application software are loaded, an
Installation completed screen appears.
6. Click Finish.
Driver Kit Installer
Each driver kit contains and loads all the Windows drivers for a specific protocol, and
includes ElxPlus.

FC driver package (elxdrvr-fc-<version>.exe)

FCoE driver package (elxdrvr-fcoe-<version>.exe)

iSCSI driver package (elxdrvr-iscsi-<version>.exe)

NIC+RoCE driver package (elxdrvr-nic-<version>.exe)
Note: Updating the NIC protocol driver may temporarily disrupt operation of any
NIC teams configured on the system.
Loading the Driver Kit
The driver kit copies the selected Emulex drivers and applications onto your computer.
Note: This procedure does not install drivers, and no driver changes are made until
you run the AutoPilot Installer.
To load the driver kit:
1. Download the driver kit from the Emulex website to your system.
2. Double-click to run the driver kit. The Emulex Kit Welcome page opens.
3. Click Next. The Installation Options page opens.
4. Select one or both of the following options: