Dell Emulex Family of Adapters - Manual (Page 1391)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
Viewing Audit Logs Using the CLI Command
1391
version
Syntax
elxvcpcmd.exe version
Description
This command shows the version of the CLI installed.
Parameters
None.
Viewing Audit Logs Using the CLI Command
Note: All active management actions performed are saved to a log file specific to the
action. The maximum size of a log file is 2 MB. If the size of the log file exceeds
this limit, old log entries are deleted for the particular event.
Syntax
elxvcpaudit.exe <event name>
Note: If the event name is not specified, all events are displayed.
Description
You can use the elxvcpaudit.exe script to log all the historical active management
performed through the vSphere console on the Emulex adapters. To see the usage
information, run the script with no parameters specified. All supported events are
displayed.
Parameter
List of Supported Event Names
MAC
The MAC address of the iSCSI port.
Port (0/1)
Port number of the iSNS server to configure (value: 1024-65535).
event name
The command name describing the appropriate active management
action performed.
installadapterlicense
Shows if any licenses are installed on the UCNA.
changepersonality
Shows if any personality changes are performed on the
UCNA.
loopbacktest
Shows diagnostic tests run on the UCNA.
setdriverparam
Shows the driver parameters changed on a LightPulse or
OneConnect adapter at both port and global levels.