Dell Emulex Family of Adapters - Manual (Page 1255)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
6. Managing Adapters and Ports
OCe10100–Series and OCe11100–Series Adapters
1255
Figure 6-44 Install Feature Licenses Dialog Box
5. Following the instructions you received with the Entitlement Code, go to the
License website and enter the Adapter ID and Entitlement Code.
6. When the Adapter ID and Entitlement Code are successfully validated, download a
License Key File containing one or more activation keys.
7. In the Install Feature Licenses dialog box, click Browse. The file selection dialog box
appears. Select the file you want to use and click OK.
8. A dialog box appears confirming that you want to install the licenses. Click Yes.
9. A dialog box appears notifying you that the installation was successful or why it
failed. Click OK.
Changing Personalities on OCe10100–Series and OCe11100–
Series Adapters
OneCommand Manager for VMware vCenter allows you to change the personality
running on an OCe10100-series or an OCe11100-series adapter. There are three
personalities: NIC-Only, FCoE, and iSCSI.
Note: OneCommand Manager for VMware vCenter does not support personality
change for the LPe16202 CFA.
In some cases the adapters come pre-configured to support multiple personalities. In
other cases an enablement license must be installed before the adapter can support
multiple personalities. Refer to “Installing Licenses” on page 111 for more information.
To change the personality of an adapter:
1. Select a host in the vSphere console tree-view and select the Emulex OneCommand
tab.
2. In the Emulex Device Management tree-view, select an adapter whose personality
you want to change.
3. Select the Adapter Information tab (Figure 6-42). From the Personality area of the
Adapter Information tab, select the personality type you want and click Apply.