Dell Emulex Family of Adapters - Manual (Page 349)

OneCommand Manager Command Line Interface Version 10.2 User Manual P010067-01A Rev. A
5. CLI Client Command Descriptions
DCB Commands
349
GetPGInfo
This command shows the ETS priority group bandwidth percentages for the port of a
OneConnect adapter. Additionally, this command displays the number of priority
groups supported by an adapter.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
GetPGInfo <WWPN|MAC>
Parameters
Example
hbacmd h=10.192.203.154 getpginfo 00-00-c9-93-2f-d8
SetCnaPGBW
This command sets the ETS priority group bandwidth percentages on a port of a
OneConnect adapter according to the following rules:

Bandwidths (BW0–BW7) for priority groups 0–7 (PG0–PG7) must total 100 (for
100%).

Bandwidth can be assigned to a priority group that has priorities.
Supported By
Linux, Solaris, VMware ESXi, and Windows
Syntax
SetCnaPGBW <WWPN|MAC> <BW0–BW7>
Parameters
Example
This command sets the bandwidth of PG0 to 50%, PG1 to 50%, and PG2–PG7 to 0%.
hbacmd SetCnaPGBW 10:00:00:00:c9:3c:f7:88 50 50 0 0 0 0 0 0
WWPN
The WWPN address of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
WWPN
The WWPN of an FC or FCoE port.
MAC
The MAC address of a NIC or iSCSI port.
BW0–BW7
The bandwidths allocated for the priority groups 0–7.