Dell Emulex Family of Adapters - Manual (Page 1187)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
4. Managing Clusters
Viewing Information in a Cluster
1187
Figure 4-4 Close-Up of Host-Centric Cluster View
Host centric Information Field Definitions

Port WWN – The Port World Wide Name.

Link Status – The status of the link on the selected port.

Fabric – This is a 64-bit worldwide unique identifier assigned to the fabric.

Driver Name – The executable file image name for the driver as it appears in the
Emulex driver download package.

Driver Version – The version of the installed driver.

Active FW Version – The active firmware version.

Flash FW Version – The firmware version that will become active once the
system is rebooted.
Viewing Virtual Port Information in a Cluster (Host centric
mode)
To view virtual port information in a cluster in host-centric mode:
1. Select a cluster in the vSphere console tree-view.
2. Select the Emulex OneCommand tab, port host information is displayed.
3. From the Emulex Device Management options, select vPorts. The Virtual Port
information is displayed.