Dell Emulex Family of Adapters - Manual (Page 1315)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
9. Diagnostics
LightPulse FC HBA Diagnostic Tests
1315
Setting Up a Test Pattern
Enter a custom test pattern to be used in tests that transfer data. The test pattern can be
up to eight hexadecimal bytes.
Test Status
The Test Status area shows how many completed cycles of each test ran, as well as the
number of errors.
Saving the Log File
You can save the test log to a log file for later viewing or printing. When data is written
to a saved file, the data is appended at the end of the file. Each entry has a two-line
header with the adapter identifier and the date and time of the test. The data
accumulates to form a chronological history of the diagnostics performed on the
adapter.

The default location is the OneCommand Manager for VMware vCenter install
directory on your local drive.

In the VMware Server: There is no default directory for ESXi.
After writing an entry into the log, you are prompted to clear the display. Figure 9-7
shows the Diagnostic Test log entries that will be saved to the log file.
Figure 9-7 Diagnostic Test Log Entries
To save the log file:
1. After running a test from the Diagnostic tab, click Show Test Logs. The Diagnostic
Test Logs dialog box appears. The default name of a saved file is DiagTest.log.