Dell Emulex Family of Adapters - Manual (Page 1341)

OCM for VMware vCenter Version 10.2 User Manual P009805-01A Rev. A
11. Using OneCommand Manager for VMware vCenter Command Line Interface
The Command Reference
1341
deletedumpfiles
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> deletedumpfiles <WWN | MAC>
Description
This command deletes all diagnostic dump files for a given port.
Parameters
driverconfig
Syntax
elxvcpcmd.exe v=<vcenter_server> u=<vc_username> p=<vc_password>
h=<esx_host> driverconfig <WWPN> <FileName> <Flag>
Description
This command sets all driver parameters to the values in the .dpv file on a particular
ESXi host. The .dpv file’s driver type must match the driver type of the host platform
FC/FCoE adapter.
Parameters
D_Port
elxvcpcmd.exe v=10.192.000.000 u=root p=password d_Port WWPN
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
MAC
The MAC address of the NIC or iSCSI port.
v
The vCenter server IP address.
u
The user name for the vCenter server.
p
The user password for the vCenter server.
h
The IP address of the ESXi host with Emulex adapters.
WWPN
The WWPN of a port on the ESXi host with Emulex adapters.
FileName
The name of the .dpv file (stored in the Emulex Repository directory)
Flag
G = Makes change global (all adapters on this host)
N = Makes change non-global (adapter-specific)