Dell Emulex Family of Adapters - Manual (Page 1674)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Configuring the Network
1674
Configuring the IPv6 Address
To configure the IPv6 address:
1. On the Configure IPV6 Address screen (Figure 12-10), select Configure IPV6
Address and press <Enter>. The Configure IPV6 Address screen appears.
Figure 12-11 Configure IPV6 Address Settings Screen
2. Enter the link local address, IPv6 address, routable address 1, routable address 2,
and default gateway address in the corresponding fields.
3. Press <Esc> to exit the menu.
Pinging the iSCSI Initiator
To ping the iSCSI initiator, on the Configure IPV6 Address screen (Figure 12-10), select
Ping and press <Enter>.

If the ping is successful, a reply message is displayed with the iSCSI initiator IP
address.

If the ping is not successful, a failure message is displayed.