Dell Emulex Family of Adapters - Manual (Page 1185)

OneCommand Manager for VMware vCenter Version 10.2 User Manual P010089-01A Rev. A
4. Managing Clusters
Viewing Information in a Cluster
1185
Hosts Information Field Definitions

IP Address – The IP address of the host in the cluster.

Operating System – The operating system and version installed on the host.

Drivers – The drivers and their versions installed on the host.

CIM Provider Version – The version of the Emulex CIM Provider that is
running on the ESXi host.

Adapters – The number of adapters installed in the host.

Fabrics – The number of fabrics to which the host is connected.

Ports – The number of discovered physical ports that can be managed by the
host.

Lock Down Mode – Specifies if lock down mode is enabled or disabled.
To navigate Hosts Information fields:
1. Use the Filter list to filter the host information. You can choose any of the available
host information fields from the list, enter a wildcard for the field and click Search.
2. Click Clear to clear the search criteria.
3. Click Refresh to refresh the information. If a host is added to the currently selected
cluster, the host information is refreshed.
Viewing Adapter Information
You can view information about all adapters belonging to the various hosts in a cluster.
To view adapter information:
1. Select a cluster in the vSphere console tree-view and select the Emulex
OneCommand tab.
2. From the Emulex Device Management options, select Adapters. Adapters
information is displayed.
Figure 4-2 Adapters Information