Configuring luns, Figure 12-21 – Dell Emulex Family of Adapters User Manual
Page 1686
Advertising
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
12. Configuring UEFI for iSCSI
Adding and Configuring Targets
1686
Configuring LUNs
To configure LUNs:
1. On the Edit/Ping Target screen (Figure 12-18), select LUN Configuration and press
<Enter>. The LUN Configuration screen is displayed.
Note: You may need to select ..more to display additional configuration options.
Figure 12-21 LUN Configuration Screen
2. If the target is a boot target, select any single LUN as a boot LUN using the <Space>
bar.
Note: If the target is not a boot target, you cannot select any LUNs.
3. Select Save Changes and press <Enter>.
Advertising