Figure d-1 – Dell Emulex Family of Adapters User Manual
Page 1759
Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual
P010097-01B Rev. A
Appendix D. Example for Installing and Booting UEFI FCoE
1759
Appendix D. Example for Installing and Booting
UEFI FCoE
The following steps use the Linux SLES operating system as an example.
1. Boot to UEFI linux from DVD.
2. Select UEFI boot from the BIOS boot manager or boot to shell and execute
/efi/boot/elilo.efi from removable media.
3. Follow normal boot instructions from YaST.
4. During the Installation Settings, select Partitioning, then select Custom
partitioning (for experts).
5. In SystemViews, select a hard disk.
6. Select the Partitions tab.
7. Delete any old partitions on the disk.
8. To create a GPT disklabel (UEFI does not support booting from disks with an
MS-DOS partition table), click Expert (above the Accept button).
9. Create a partition table and check GPT (required for UEFI boot).
Figure D-1 Partitions Tab