Dell Emulex Family of Adapters - Manual (Page 1744)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
Appendix C. Examples for Configuring and Booting UEFI NIC
UEFI NIC IPv6 PXE Setup Procedure for SLES11 SP2
1744
UEFI NIC IPv6 PXE Setup Procedure for SLES11 SP2
Setup Information
PXE server: CISCO UCS C240 with SLES11 SP2 operating system
PXE client server: DELL R620 Server F6PCP adapter installed
PXE Server Setup
Launch ‘yast2’
Configure Network Adapter
1. In the Network Devices section, select Network Settings.
2. Select the adapter port you wish the PXE server to use, then click Edit.
3. Select Statically assigned IP Address and enter the following settings:

IP Address: 192.168.1.1

Subnet Mask: /24
4. Under the Additional Addresses section, click Add to add an alias.

Alias Name: ipv6static

IP Address: fc00:ba49:1625:fb0f::137

Netmask: /64
5. Click OK.
Disable Firewall
1. In the Security and Users section, select Firewall.
2. Select Disable Firewall Automatic Starting.
3. Click Stop Firewall Now.
Install Services
1. In the Network Services section, select DHCP Server.
2. Choose to install and accept all defaults.
3. Install NFS server, TFTP server, and FTP server one by one by accepting all
defaults.