Dell Emulex Family of Adapters - Manual (Page 1638)

Boot Version 10.2 for NIC, iSCSI, FCoE, and RoCE Protocols User Manual P010097-01B Rev. A
11. Configuring UEFI for Ethernet
Starting the Emulex NIC Configuration Utility
1638
Selecting the NIC+RoCE Personality
Note: The NIC+RoCE personality is available only on OCe14000-series adapters
running Windows with multichannel and SR-IOV disabled.
The NIC+RoCE personality implies that all the enabled functions provide RoCE
functionality.
When NIC+RoCE is enabled, you must select a NIC+RoCE profile. The NIC+RoCE
profile allows you to select the appropriate profile for your particular system setup. The
NIC+RoCE profile choices include:

RoCE-1 – For the RoCE-1 profile, check the Implementer's Lab on the Emulex
website for any updated information on use cases for the RoCE-1 profile.

RoCE-2 – Choose the RoCE-2 profile for SMB Direct on Windows Server 2012
and Windows Server 2012 R2.
To select the NIC+RoCE personality:
1. From the Personality Selection screen (Figure 11-7), select NIC+RoCE and press
<Enter>. The NIC+RoCE Profile pop-up menu appears.
Figure 11-8 NIC+RoCE Profile Screen with Pop-Up Menu
2. Select the desired NIC+RoCE profile and press <Enter>.
3. Select Save and press <Enter>.
Note: Additional configuration changes may be made after changing the Personality
setting; however, a reboot is required before the new Personality setting will
take effect.