Dell Emulex Family of Adapters - Manual (Page 164)

OneCommand™ Manager Application P010066-01A Rev. A
8. Managing Adapters and Ports
iSCSI
164
3. Select the iSCSI Port Information tab.
Figure 8-34 iSCSI Port Information Tab
iSCSI Port Information Field Definitions

Driver Name – The iSCSI driver file name.

Driver Version – The iSCSI driver version.

MAC Address – The iSCSI MAC address currently assigned to the port.

Perm MAC Address – The original factory-assigned iSCSI MAC address.

Device ID – The PCI device ID assigned to the iSCSI function.

Vendor ID – The PCI vendor ID assigned to the iSCSI function.

PCI Function – The PCI function number assigned to the iSCSI function.

LDTO – (Link Down Time Out) The amount of time in seconds that the iSCSI
driver delays reporting a link down error to the operating system.

Max MTU – Maximum transmission unit for iSCSI traffic.

Default ETO – The default extended timeout.

Max CDB Length – Maximum SCSI command descriptor block size.

SubSys Device ID – The PCI subsystem ID assigned to the iSCSI function.

SubSys Vendor ID – The PCI subsystem vendor ID assigned to the iSCSI
function.

PCI Bus number – The PCI bus number assigned to the iSCSI function.
Viewing iSCSI Network Information
The Network Information tab displays connection information such as link status and
port speed. The tab also allows you to enable or disable DHCP authentication and
VLANs, assign IP addresses, subnet masks, VLAN IDs and priorities, and more for the
selected iSCSI port. You can also enable or disable iSCSI boot.