Dell Emulex Family of Adapters - Manual (Page 684)

Emulex Drivers for Windows User Manual P010077-01A Rev. A
4. Troubleshooting
Troubleshooting the FC/FCoE Driver
684
lpfc_mes1401: Invalid tag: ContextIndex: x%x, ulpCommand: x%x
NPIV Messages (1800–1899)
lpfc_mes1800: NPIV FDISC failure VPI: x%x Error x%x Reason x%x
lpfc_mes1801: Memory allocation failure for NPIV port: x%x
lpfc_mes1802: Exceeded the MAX NPIV port: x%x
lpfc_mes1803: Virtual Port: x%x VPI:x%x successfully created.
Description Firmware has generated an invalid response.
Severity Error
Log
LOG_LINK_EVENT verbose
Action Review hardware configuration. Contact Emulex
Technical Support.
Description Virtual Port fails on a FDISC to the switch with
the error and reason listed.
Severity Error
Log
LOG_NPIV verbose
Action Check to ensure the switch supports NPIV.
Description Fails to allocated the block of memory for the
Virtual Port.
Severity Error
Log
LOG_NPIV verbose
Action Check to ensure system has sufficient kernel
memory.
Description Exceeded the number of Virtual Port allows on
the adapter.
Severity Error
Log
LOG_NPIV verbose
Action Reduce the number of Virtual Ports.
Description Virtual Port ID is successfully created.
Severity Information
Log
LOG_NPIV verbose
Action No action needed, informational.